| |
| When touching the ENT key by Keyboard, fix the input. To let PLC know when ENT key is pressed, there are following 2 ways. |
| |
| - |
Using the Parts of Keypad Input Display in GP-PRO/PB3 C-Package03 (V7.0 or later) |
| |
In GP-PRO/PB3 C-Package03 V7.0 or later, the Parts of Keypad Input Display have [Input Completion] function. When inputting the data by Keypad, the Bit Address set here turns ON. （Please turn this bit OFF on PLC side.） |
| |
 |
| |
*Only GP2000 series, GLC2000 series and ST series support this function. As for other models, please refer to the following method. |
| |
|
| - |
Using GP-PRO/PB3 C-Package03 (less than V7.0) or K-tag |
| |
|
| |
| Connecting to PLC or Controller |
| The 03rd bit of "Word Address+6" in System Data Area changes. This bit turns ON/OFF as ENT key is touched. |
|
|
| |
|
| |
| Connecting to a Board Computer by [Memory Link Method] |
| In this case, the 3rd bit of 0001 address in System Data Area changes. This bit inverts as ENT key is touched. |
|
|
| |
|
| |
Return to Top
Back